Densitometric Evaluation.

1. Read the LAD densities of the processed film. The aim densities are listed in Addendum 1. Apply any densitometric crossover readings that may exist between Kodak's reading and the laboratory's readings.
2. The suggested practical tolerances for LAD densities for intermediates and prints are as follows:
   
   Answer prints + 0.08 Intermediates, Internegatives + 0.12, Release prints + 0.12*
   
   * Difference between the three colours should not exceed 0.10 prints. For example, Print No. 1 below would be considered acceptable, while Print No. 2 should be rejected.

Print No. 1			.
	Aim	Print Dens	Diff. from Aim	Max.Colour Diff.
R	1.09	1.15	+0.06
G	1.06	1.18	+0.12	+0.09
B	1.03	1.06	+0.03
Print No. 2
R	1.09	1.12	+0.03
G	1.06	1.06	0.00
B	1.03	0.92	-0.11	-0.14

Print No 2 would appear more than a 15 CC filter blue and would probably be rejected by the customer.